42755-0392 VFlo Constant Pressure Water System Pump

 

42755-0392
£ 0.00 ex. VAT
 
VFlo Constant Pressure Water System Pump
Electronically controlled variable flow, 12 volt d.c.

This product is now obsolete.
The details supplied here are for information only.
NO CURRENT REPLACEMENT

  • Connections: - for 13mm (½”) bore hose or Hep20 push-fit connectors CW193
  • Dimensions: - 252mm long, 116mm wide, 105mm high
  • Fuse Size: - 15(amp)
  • Output: - up to 19 litres/minute (4.15 gallons/minute) open flow
  • Unique constant pressure
  • Efficient, high-flow, self-priming pump serving 1 to 5 outlets
  • Multi-diaphragm design self primes to 2.5m vertical lift, can run dry without damage
  • Running pressure: 1.7bar (25psi). Shut-off pressure: 2.4bar (35psi).
  • Runs quietly under normal use
  • Amp draw reduces as flow reduces to conserve battery power.
  • Motor protected by automatic thermal overload cut-out
  • Supplied with strainer and snap-in ports for hose or Hep20 connectors
  • Packaged Dimensions: L:46.00 x H:19.00 x W:19.00cm
  • Actual Weight: 3.22 Kg  (Approx. 3.72 Kg packed)

 


Q&As (0)
Customer Feedback (0)
Full Parts List
VFlo 2.4bar constant pressure water system pump 12v

KeyDescriptionQuantity Reqd.
Per Product
In StockPrice Each
ex. VAT
 
1Click here to enquire about this part.1
2KIT VALVE EPDM1
Checking...
£ 18.91
3DIAPHRAGM KIT
Santoprene. For the square Quad series
1
Checking...
£ 14.67
4Click here to enquire about this part.1
5Click here to enquire about this part.1
6PORT KIT 1/2" HOSE
Pair of ports, EPDM 'O' Ring
1
Checking...
£ 13.38
6PORT KIT 90 DEG ELBOW 1/2" HOSE
Pair of ports, EPDM 'O' Ring
1
Checking...
£ 11.96
8PORT CLIPS
For snap in ports - square head pumps, Parmax 4, Quad pumps
1
Checking...
£ 3.99
9PRESSURE SWITCH 40psi HP1
Checking...
£ 42.47
SERVICE KIT - Santoprene / EDPM
Contains: Santoprene Diaphragm, EPDM Valves and #3 Cam
1
Checking...
£ 37.31
STRAINER - FINE MESH SNAP IN1
Checking...
£ 15.96