Toilet Waste Pumps

- "Why do I need a macerator pump?"Because a uniform slurry is more easily pumped than raw toilet waste.Whether discharge is overboard (at sea), or from a holding tank to a shore pump-out station, waste that has been macerated is pumped faster, with less risk of annoying and unpleasant blockages, and with less load on the pump.JABSCO macerator pumps have 38mm (1½") bore inlet ports for efficient handling of solids. The pump takes in raw waste, and grinds it to a consistency that can be safely discharged via 25mm (1") bore pipework.IMPORTANT NOTE:
- JABSCO macerator pumps are designed to handle normal toilet waste and easily-disintegrated toilet tissues. They will not handle high wet-strength tissues, sanitary towels, napkins, diapers, rags or hard objects.
- Pumping out the toilet waste holding tankNever the most welcome of tasks, emptying the toilet waste holding tank requires a robust reliable pump that will do the job with the minimum of fuss.If a shore pump-out station can do the job for you - no problem! But for the times when you need your own pump on board, choose a JABSCO electric or manually-operated pump designed for the purpose - simple, efficient and fully serviceable.
- No Jabsco pump should be used for petrol, solvents or any liquid with a flash point below 37oC( 98oF)
-
Showing 1 - 10 of 10
 

18590-2092
Macerator pump
£ 189.96 ex. VAT

12 volt d.c.

18590-2094
Macerator pump
£ 190.33 ex. VAT

24 volt d.c.
 
 

Connections for 38mm (1½”) bore hose

Connections for 38mm (1½”) bore hose
 
 
 
 

BSP threaded connections for on-board & dockside holding tank pump-out

BSP threaded connections for on-board & dockside holding tank pump-out
Heavy Duty Model
 
 

BSP threaded connections for on-board & dockside holding tank pump-out

BSP threaded connections for on-board & dockside holding tank pump-out
 
Showing 1 - 10 of 10