53020-2013 Utility 20' ¾" Self-Priming Flexible Impeller Pump

 

53020-2013
£ 326.24 ex. VAT
 
Utility 20' ¾" Self-Priming Flexible Impeller Pump
230volt/1 phase/50Hz a.c. (for d.c versions see ‘Utility Puppy’ in Bilge or Shower Drain sections)

  • Connections: - ¾” BSP inlet and discharge ports.
  • Dimensions: - length 275mm, width 170mm, height 171mm
  • Output: - up to 18 litres/minute (4 gallons/minute).Max 15m head
  • Built-in dry-running protection for up to 10 minutes after initial prime
  • Rapid self-priming from dry up to 2m
  • Will handle hard or soft solids
  • Corrosion resistant bronze body, stainless steel shaft
  • Carbon-ceramic mechanical shaft seal
  • Simple, fully serviceable design with few wearing parts
  • Packaged Dimensions: L:39.00 x H:27.00 x W:29.00cm
  • Actual Weight: 8.40 Kg  (Approx. 9.40 Kg packed)

 


Q&As (0)
Customer Feedback (0)
Spare Parts and Accessories
Full Parts List
Defining features: ¾" BSP ports, bronze body, 230v 1450rpm electric motor, nitrile impeller

KeyDescriptionQuantity Reqd.
Per Product
In StockPrice Each
ex. VAT
 
1SCREW4
Checking...
£ 2.68
2END COVER1
Checking...
£ 16.08
3O RING1
Checking...
£ 2.56
4IMPELLER-NITRILE1
Checking...
£ 20.35
5Click here to enquire about this part.1
6CAM1
Checking...
£ 35.61
7O-RING1
Checking...
£ 2.66
8SCREW1
Checking...
£ 2.67
9Click here to enquire about this part.1
10SEAL1
Checking...
£ 36.87
11SCREW2
Checking...
£ 2.56
12Click here to enquire about this part.1
13Click here to enquire about this part.1
14Click here to enquire about this part.1
15Click here to enquire about this part.4
16SCREW4
Checking...
£ 0.78
17WASHER4
Checking...
£ 2.66
SERVICE KIT
Contains - Impeller, Seal, 'O' Ring & End Cover Screws
1
Checking...
£ 63.89
PUMP H/KIT 3/4" BRZ 201
Checking...
£ 190.32