S-F1150W Water storage heater, 38 litre

 
S-F1150W
£ 444.72 ex. VAT
 
Water storage heater, 38 litre
230 volt a.c.

  • Connections: - 15mm (½") NPT threaded
  • Dimensions: - 406mm wide x 558mm deep x 406mm high
  • Output: - 38 litres (8.4 gallons)
  • Uses waste engine heat
  • Tough, lightweight aluminium pressure vessel
  • White painted steel casing
  • Maximum Working Pressure - 5 bar (70 p.s.i.)
  • Rockwool thermal insulation
  • 1.5kW electric immersion heater fitted as standard
  • All fittings at one end
  • Tested to 20 bar (280 p.s.I.)
  • Packaged Dimensions: L:43.00 x H:42.50 x W:65.00cm
  • Actual Weight: 15.40 Kg  (Approx. 17.40 Kg packed)

 
Water storage heater, 38 litre
Water storage heater, 38 litre


Q&As (0)
Customer Feedback (0)
Spare Parts and Accessories
Full Parts List
Defining features: Seaward water storage heater 230v, same as F1150. White painted case, all fittings in one end.

KeyDescriptionQuantity Reqd.
Per Product
In StockPrice Each
ex. VAT
 
1Click here to enquire about this part.1
2Click here to enquire about this part.1
2TEMP/PRESSURE RELIEF VALVE 5bar1
Checking...
£ 26.80
3ELEMENT GASKET1
Checking...
£ 0.77
41500W 240V HEATING ELEMENT1
Checking...
£ 42.70
5240V HIGH LIMIT SWITCH1
Checking...
£ 41.27
6Click here to enquire about this part.1
7THERMOSTAT MOUNTING PLATE1
Checking...
£ 12.32
83/4" DRAIN VALVE1
Checking...
£ 5.11
9Click here to enquire about this part.1
10Click here to enquire about this part.1
11Click here to enquire about this part.1
12Click here to enquire about this part.1
13Click here to enquire about this part.1
14Click here to enquire about this part.1
15Click here to enquire about this part.1
16Click here to enquire about this part.1
17Click here to enquire about this part.1