JabscoShop is closing. Last orders accepted 16th December 2024. Details...

53040-2001 Utility 40' 1" Self-Priming Flexible Impeller Pump

 

53040-2001
£ 0.00 ex. VAT
 
Utility 40' 1" Self-Priming Flexible Impeller Pump
230volt/1 phase/50Hz 0.25kw IP54 Electric Motor, Neoprene impeller.

This product is now obsolete.
The details supplied here are for information only.

  • Connections: - 1" BSP internal threaded ports
  • Dimensions: - 300mm long, 210mm wide, 240mm high
  • Output: - up to 35 litres/minute at 3m head. Max. differential pressure 1.6bar
  • Built-in dry-running protection for up to 30 minutes after initial prime
  • Rapid self-priming from dry up to 4m
  • Will handle hard or soft solids
  • Corrosion resistant bronze body, stainless steel shaft
  • Carbon-ceramic mechanical shaft seal
  • Simple, fully serviceable design with few wearing parts
  • Packaged Dimensions: L:39.00 x H:27.00 x W:29.00cm
  • Actual Weight: 10.50 Kg  (Approx. 11.50 Kg packed)

 


Q&As (0)
Customer Feedback (0)
Spare Parts and Accessories
IMPELLER
£57.96 ex. VAT
Full Parts List

KeyDescriptionQuantity Reqd.
Per Product
In StockPrice Each
ex. VAT
 
1SCREW4
Checking...
£ 4.04
2END COVER
82mm diameter, 4 screw holes
1
Checking...
£ 22.67
3O RING - 3 pieces per pack1
Checking...
£ 12.41
4IMPELLER
12 blades. 57mm x 51mm. Double flat drive.
1
Checking...
£ 57.96
5WEARPLATE1
Checking...
£ 12.01
6Click here to enquire about this part.1
7SCREW - 3PK1
Checking...
£ 6.68
8CAM1
Checking...
£ 52.56
9Click here to enquire about this part.1
10SEAL ASSY1
Checking...
£ 66.69
11SEAL SPACER1
Checking...
£ 0.00
12SCREW4
Checking...
£ 0.00
13Click here to enquire about this part.4
14Click here to enquire about this part.1
15MOTOR 240V1
Checking...
£ 0.00
16Click here to enquire about this part.1
SERVICE KIT
Contains - Impeller, Seal, 'O' Ring & End Cover Screws
1
Checking...
£ 88.96