Q401J-112S-3A Par Max HD 4' pressure-controlled pump

 

Q401J-112S-3A
£ 198.42 ex. VAT
 
Par Max HD 4' pressure-controlled pump
12 volt d.c., 25psi 15lpm

  • Connections: for 13mm (½”) bore hose
  • Dimensions: 239mm long, 109mm wide, 97mm high
  • Fuse Size: 15(amp)
  • Output: 15 litres/minute (4 gallons/minute) open flow
  • PRESSURE SWITCH - cuts in at 0.7bar (10psi) - cuts out at 1.7bar (25psi)
  • Efficient, high-flow, self-priming pump serving 4 or more outlets
  • Multi-diaphragm design self primes to 1.5m vertical lift, can run dry without damage
  • Supplied with snap-in ports for hose 1/2" (13mm) and Strainer
  • Motor protected by automatic thermal overload cut-out Heavy duty (HD) models feature motors and cast aluminum lower housings for longer life even at high pressures
  • Other snap-in ports for hose connections are available. For Hep20 connections, use CW193W in conjunction with 30649-1000 or 30655-1000.
  • Packaged Dimensions: L:40.00 x H:14.00 x W:15.00cm
  • Actual Weight: 2.50 Kg  (Approx. 3.00 Kg packed)

 
Par Max HD 4' pressure-controlled pump
Par Max HD 4' pressure-controlled pump


Q&As (1)
Customer Feedback (0)
Full Parts List
12v, 25psi

KeyDescriptionQuantity Reqd.
Per Product
In StockPrice Each
ex. VAT
 
1PORT CLIPS
For snap in ports - Parmax 1.9, 2.9, 3 - 4gpm triangular head and 4-5gpm round head
1
Checking...
£ 3.73
2PRESSURE SWITCH - 25PSI1
Checking...
£ 24.90
3KIT VALVE EPDM - Q series
Check valve assembly for the Q series water pressure and washdown pumps
1
Checking...
£ 13.47
4DIAPHRAGM and DRIVE ASSEMBLY KIT - Santoprene
Santoprene. For the new generation Quad (Q) series
1
Checking...
£ 44.50