28340-2101 1" S80 'Industrial' Flexible Impeller Pump Head Kit
28340-2101
1" S80 'Industrial' Flexible Impeller Pump Head Kit
To fit IEC 71 standard D80 frame motor. AISI 316 stainless steel wetted parts, with neoprene impeller, nitrile seal trim.
- Connections: 1" BSP ports
- Dimensions: approx. 136mm long, 120mm wide, 120mm high
- Output: up to 74 litres/minute at 3m head @ 1500rpm. Max. differential pressure 1.7bar
- Chemical resistant 316 stainless steel parts
- Long-life mechanical shaft seal
- Widely used for Abrasive suspensions and slurries, Soaps and foaming solutions, Inks, dyes and paints, Viscous adhesives.
- Suitable for Transfer, Filling & Emptying, Recirculating/Mixing, Injection or Sampling duties
- Can handle soft or hard solids
- Viscosities up to 50,000 cP
- Self-priming up to 5m
- Other Impeller compounds and seal materials also available
- For motorised options please contact us.
- Actual Weight: 3.10 Kg (Approx. 3.60 Kg packed)
Q&As (0)
Spare Parts and Accessories
Full Parts List
Defining features: Pump head kit/Motor Pump Unit with 1" BSP ports, carbon/ceramic mechanical seal.
| 1 | SCREW - bag of 3 screws
End Cover screws
X3001-176FB | 4 |
| 2 | END COVER
28305-0010 | 1 |
| 3 | O RING - 3 pieces per pack
18753-0263 | 1 |
| 4 | IMPELLER - NEOPRENE
8 blades, 65.1mm x 50.8mm. 15.9mm shaft diameter, double flat drive
14282-0001B | 1 |
| 5 | Click here to enquire about this part.
| 1 |
| 6 | O RING - 3 pieces per pack
18753-0263 | 1 |
| 7 | WEARPLATE
18753-0200 | 1 |
| 8 | SEAL ASSY
28331-0103B | 1 |
| 9 | SEAL SPACER
28317-0000 | 1 |
| 10 | WASHER-ST.ST
X3080-091F | 4 |
| 11 | SCREW-ST.ST
X3001-180F | 4 |
| 12 | ADAPTOR
28323-0000 | 1 |
| 13 | SHAFT EXTENSION
28327-0001 | 1 |
| 14 | Click here to enquire about this part.
| 1 |
| 15 | SCREW-ST.ST
X3001-180F | 4 |
| 16 | WASHER-ST.ST
X3080-091F | 4 |
| SERVICE KIT
Contains - Impeller, Seal & Body 'O' Rings
SK377-0101 | 1 |
