28360-2101 1" E80 'Epoxy' Flexible Impeller Pump Head Kit
28360-2101
1" E80 'Epoxy' Flexible Impeller Pump Head Kit
To fit IEC 71 standard D80 frame motor. Epoxy plastic wetted parts, with neoprene impeller, nitrile seal trim.
This product is now obsolete.The details supplied here are for information only.No replacement
- Connections: 1" BSP ports (male)
- Dimensions: approx. 145mm long, 124mm wide, 120mm high
- Output: up to 74 litres/minute at 3m head @ 1500rpm. Max. differential pressure 1.7bar
- Chemical resistant High resistance thermoset plastic pump body parts
- Long-life mechanical shaft seal
- Widely used for Acids and Alkalis, Electro-plating and Photographic chemicals.
- Suitable for Transfer, Filling & Emptying, Recirculating/Mixing, Dilution and Waste Disposal duties
- No metal parts in contact with liquid
- Viscosities up to 10,000 cP
- Self-priming up to 5m
- Other Impeller compounds and seal materials also available
- For motorised options please contact us.
- Actual Weight: 2.10 Kg (Approx. 2.60 Kg packed)
Q&As (0)
Spare Parts and Accessories
Full Parts List
Defining features: Pump head kit/Motor Pump Unit with 1" BSP ports, carbon/ceramic mechanical seal.
| 1 | SCREW
X3002-182F | 4 |
| 2 | END COVER
28355-0000 | 1 |
| 3 | O RING - 3 pieces per pack
18753-0263 | 1 |
| 4 | IMPELLER - NEOPRENE
8 blades, 65.1mm x 50.8mm. 15.9mm shaft diameter, double flat drive
14282-0001B | 1 |
| 5 | BODY
28354-2000 | 1 |
| 6 | SEAL ASSY
28331-0103B | 1 |
| 7 | SEAL SPACER
28317-0000 | 1 |
| 8 | WASHER-ST.ST
X3080-091F | 4 |
| 9 | Click here to enquire about this part.
| 4 |
| 10 | ADAPTOR
28323-0000 | 1 |
| 11 | SHAFT EXTENSION
28367-0000 | 1 |
| 12 | Click here to enquire about this part.
| 2 |
| 13 | SCREW-ST.ST
X3001-180F | 4 |
| 14 | WASHER-ST.ST
X3080-091F | 4 |
| SERVICE KIT
Contains - Impeller, Seal & Body 'O' Rings
SK377-0101 | 1 |
