28360-2101L 1" E80 'Epoxy' Flexible Impeller Motor Pump Unit
28360-2101L
1" E80 'Epoxy' Flexible Impeller Motor Pump Unit
Complete with to 230v/1 phase/50Hz 960rpm electric motor. Epoxy plastic wetted parts, with neoprene impeller, nitrile seal trim.
- Connections: 1" BSP ports (male)
- Dimensions: approx. 400mm long, 230mm wide, 180mm high
- Motor Power: 0.37(kW)
- Output: up to 48 litres/minute at 3m head. Max. differential pressure 1.7bar
- Chemical resistant High resistance thermoset plastic pump body parts
- Long-life mechanical shaft seal
- Widely used for Acids and Alkalis, Electro-plating and Photographic chemicals.
- Suitable for Transfer, Filling & Emptying, Recirculating/Mixing, Dilution and Waste Disposal duties
- No metal parts in contact with liquid
- Viscosities up to 700cP
- Self-priming up to 5m
- Other Impeller compounds and seal materials also available
- For motorised options please contact us.
- Actual Weight: 11.75 Kg (Approx. 12.75 Kg packed)
Q&As (0)
Spare Parts and Accessories
Full Parts List
Defining features: 240v 0.37kW 960rpm Motor Pump Unit with 1" BSP ports, carbon/ceramic mechanical seal.
| 1 | SCREW
X3002-182F | 4 |
| 2 | END COVER
28355-0000 | 1 |
| 3 | O RING - 3 pieces per pack
18753-0263 | 1 |
| 4 | IMPELLER - NEOPRENE
8 blades, 65.1mm x 50.8mm. 15.9mm shaft diameter, double flat drive
14282-0001B | 1 |
| 5 | BODY
28354-2000 | 1 |
| 6 | SEAL ASSY
28331-0103B | 1 |
| 7 | SEAL SPACER
28317-0000 | 1 |
| 8 | WASHER-ST.ST
X3080-091F | 4 |
| 9 | Click here to enquire about this part.
| 4 |
| 10 | ADAPTOR
28323-0000 | 1 |
| 11 | SHAFT EXTENSION
28367-0000 | 1 |
| 12 | Click here to enquire about this part.
| 2 |
| 13 | SCREW-ST.ST
X3001-180F | 4 |
| 14 | WASHER-ST.ST
X3080-091F | 4 |
| SERVICE KIT
Contains - Impeller, Seal & Body 'O' Rings
SK377-0101 | 1 |
| MOTOR 240V
JM16-370W | 1 |
