28440-2115C 1.5" S200 'Industrial' Flexible Impeller Motor Pump Unit

28440-2115C

1.5" S200 'Industrial' Flexible Impeller Motor Pump Unit

Complete with to 230v/1 phase/50Hz 1430rpm electric motor. AISI 316 stainless steel wetted parts, with neoprene impeller, nitrile seal trim.

Connections: 1.5" BSP ports
Dimensions: approx. 467mm long, 240mm wide, 210mm high
Motor Power: 1.5(kW)
Output: up to 170 litres/minute at 3m head. Max. differential pressure 1.7bar
Chemical resistant 316 stainless steel parts
Long-life mechanical shaft seal
Widely used for Abrasive suspensions and slurries, Soaps and foaming solutions, Inks, dyes and paints, Viscous adhesives.
Suitable for Transfer, Filling & Emptying, Recirculating/Mixing, Injection or Sampling duties
Can handle soft or hard solids
Viscosities up to 150cP
Self-priming up to 5m
Other Impeller compounds and seal materials also available
Packaged Dimensions: L:60.00 x H:35.00 x W:35.00cm
Actual Weight: 22.64 Kg (Approx. 24.64 Kg packed)

Q&As (0)

Spare Parts and Accessories