JabscoShop is closing. Last orders accepted 16th December 2024. Details...

22130-2721 MACERATOR PUMP 110V / 240V

 

22130-2721
£ 978.75 ex. VAT
 
MACERATOR PUMP 110V / 240V

  • Dual voltage 50hz supply motor
  • Self priming to 5ft, this pump will empty a typical 30 gallon (115litre) holding tank in less than 3 minutes.
  • Stainless Steel Cutter reduces particle size to 1/8" (3mm) maximum. 4 blade design
  • Inlet - 1-1/2" (38mm) Hose Barb and 1-1/2" N.P.T. (Male)
  • Outlet - 1" (19mm) Hose Barb
  • Packaged Dimensions: L:45.00 x H:28.00 x W:24.00cm
  • Actual Weight: 10.48 Kg  (Approx. 11.48 Kg packed)

 
MACERATOR PUMP 110V / 240V
MACERATOR PUMP 110V / 240V


Q&As (0)
Customer Feedback (0)
Full Parts List

KeyDescriptionQuantity Reqd.
Per Product
In StockPrice Each
ex. VAT
 
1Click here to enquire about this part.
Replaced by Bolt Kit (below)
4
2WASHER4
Checking...
£ 1.86
3Click here to enquire about this part.
Replaced by Bolt Kit (below)
2
4MACERATOR HOUSING1
Checking...
£ 41.87
5CHOPPER AND LOCK NUT KIT
For macerator pump 18590-2xxx series
1
Checking...
£ 7.74
6WEARPLATE1
Checking...
£ 11.34
7GASKET KIT
Contains 2 gaskets
1
Checking...
£ 8.94
8IMPELLER-NITRILE
51mm x 22 mm, 6 blades, single flat drive
1
Checking...
£ 29.33
9WEARPLATE1
Checking...
£ 13.33
10BODY1
Checking...
£ 38.14
11SEAL
Replaced by 1040-0000
1
Checking...
£ 17.19
12SLINGER - 3 per pack1
Checking...
£ 13.33
13Click here to enquire about this part.
Replaced by Bolt Kit (below)
2
14Click here to enquire about this part.
Motor 230v
1
Stainless Steel Bolt Kit
Replaces studs, nuts and washers in older models.
1
Checking...
£ 17.36
SERVICE KIT - 18590 macerator pump
Contains Body, Impeller, Wearplate , Gaskets and Seal
1
Checking...
£ 51.60