38245-4194 QUIET FLUSH E2 ELECTRIC TOILET Sea water flush models, Regular bowl size, 24 volt dc

38245-4194

£ 868.70 ex. VAT

QUIET FLUSH E2 ELECTRIC TOILET Sea water flush models, Regular bowl size, 24 volt dc

with Slow Close seat and cover

NEW! Quick release system offering quick and simple access to discharge pump for servicing

Click here to rate this product!

Connections: - for 19mm ( ¾”) bore inlet hose, 25mm (1“) bore discharge hose
Dimensions: - 362mm high, 366mm wide, 473mm deep
Fuse Size: - 13(amp)
Maximum Current: - 10(amps)
Powerful centrifugal discharge pump to break up and evacuate waste
Supplied with separate pump for use with sea/river/lake water, self-priming to 1.8m
Easy clean shroud hiding all fixings
Electronic control panel featuring ‘eco’ water saver mode
Rotatable base and discharge pump to ensure pipework can be routed to rear
Quick release discharge ports for simple installation (straight and 90° discharge available)
For more information, including videos, datasheet and installation documents, please visit:
https://www.xylem.com/en-uk/products--services/pumps-packaged-pump-systems/packaged-solutions/marine-toilets/quiet-flush-e2-marine-toilet/
Packaged Dimensions: L:54.00 x H:43.00 x W:52.00cm
Actual Weight: 17.50 Kg (Approx. 19.50 Kg packed)

Add To Wishlist

Add to Shortcuts

Add To Basket

QUIET FLUSH E2 ELECTRIC TOILET Sea water flush models, Regular bowl size, 24 volt dc

Ask A Question | View All

Q&As (5)

Leave Feedback

Customer Feedback (0)

Spare Parts and Accessories

29015-0020

25mm (1") discharge vented loop

£46.93 ex. VAT

£70.93 ex. VAT

38mm (1½") discharge vented loop

Add

£39.06 ex. VAT

Full Parts List

Quiet Flush E2 - seawater flush - regular bowl - 24v

Key	Description	Quantity Reqd. Per Product	In Stock	Price Each ex. VAT
A	SERVICE KIT - Quiet Flush E2 Contains - base cover screw (key 9a), waste pump housing o-rings (keys 13, 14a), joker valve (key 15), motor adaptor o-ring (key 19), washer seals (key 22), shaft seal (key 25), slinger (key 26)	1	Checking...	£ 32.81	Add
B	24v Pump Assembly Kit - Quiet Flush E2 Contains keys: 13-14a, 18-27c	1	Checking...	£ 238.00	Add
C	Base Assembly- Quiet Flush E2 Contains - base (key 12), C clip (key 11), hardware (keys 7a-7e)	1	Checking...	£ 72.68	Add
D	Discharge Port (Straight) - Quiet Flush E2 Contains 25mm (1") straight port (key 16a), o-ring (key 14a) and clip (key 17)	1	Checking...	£ 18.79	Add
E	Discharge Port (90°) - Quiet Flush E2 Contains 25mm (1") elbow port (key 16b), o-ring (14a) and clip (key 17)	1	Checking...	£ 18.79	Add
1	SEAT AND LID (SOFT CLOSE) For regular size bowl toilets from 2018 only (flat edge at back and Jabsco logo)	1	Checking...	£ 90.41	Add
1a	HINGE KIT - SOFT CLOSE (round design) Hinge Kit for Soft Close Toilet seats used on the regular bowl manual, Quiet Flush and Deluxe Flush toilets with flat edge and Jabsco logo on bowl.	1	Checking...	£ 34.80	Add
2	TOILET BOWL - HOUSEHOLD SIZE For regular toilets from 2018 onwards	1	Checking...	£ 153.36	Add
3	INTAKE SEAL AND ELBOW KIT	1	Checking...	£ 17.36	Add
4	HOSE	1	Checking...	£ 31.46	Add
4a (not shown)	TOILET HOSE ADAPTOR 1" (25mm) to 1.5" (38mm)	1	Checking...	£ 13.87	Add
8	GASKET for base with Sloping Sides O' Ring Gasket	1	Checking...	£ 5.46	Add
9, 9a	Base cover - Quiet Flush E2 Contains base cover (key 9) and screw (key 9a)	1	Checking...	£ 21.68	Add
28	Control Panel - Quiet Flush E2 Contains touch panel and control box.	1	Checking...	£ 151.73	Add
30	RINSE PUMP 24V TOILET Pump to supply rinse water to 37245 / 38245 Quiet Flush, 58500 Lite Flush and 582x0 Deluxe Flush Toilets	1	Checking...	£ 113.07	Add
31	STRAINER - FINE MESH SNAP IN	1	Checking...	£ 15.96	Add