CW408 Maxi-System 4 Pressure System

CW408

Maxi-System 4 Pressure System

24 volt d.c.

This product is now obsolete.
The details supplied here are for information only.
Replace with Q402J-112S-3A and CW269

Connections: - for 15mm HEP₂O pipe work
Dimensions: - 320mm long, 276mm wide, 140mm high
Fuse Size: - 7(amp)
Maximum Current: - 3(amps)
Output: - 16.3 litres/minute (3.6 gallons/minute) open flow
PRESSURE SWITCH - cuts in at 0.7bar (10psi) - cuts out at 1.7bar (25psi)
Pre-assembled and tested for quick and simple installation in small/medium sized boats: serves up to 6 outlets
3 screws, 2 HEP₂O water connections, 2 wires - and the installation is complete!
Based on JABSCO 31620-series self-priming PAR-MAX4 pump
Includes 2 litre accumulator tank and inlet strainer
All mounted on stainless steel base
Packaged Dimensions: L:42.00 x H:17.00 x W:35.00cm
Actual Weight: 4.95 Kg (Approx. 5.45 Kg packed)

Q&As (0)

Spare Parts and Accessories

Accessories

Hep₂O
Push-fit pipe and fittings for hot and cold water

C-Warm Heaters (30)
Water storage heaters.
Copper cylinders up to 141 litres capacity