CW299A Maxi-System 3 Pressure System

CW299A

Maxi-System 3 Pressure System

12 volt d.c.

This product is now obsolete.
The details supplied here are for information only.
Nearest Replacement - CW407 MAXI-SYSTEM 4+2 12V
Replacement Item: CW407 - Maxi-System 4 Pressure System

Connections: - for 15mm HEP₂O pipe work
Dimensions: - 320mm long, 276mm wide, 140mm high
Fuse Size: - 10(amp)
Maximum Current: - 5(amps)
Output: - 13.2 litres/minute (2.9 gallons/minute) open flow
PRESSURE SWITCH - cuts in at 0.7bar (10psi) - cuts out at 1.7bar (25psi)
Pre-assembled and tested for quick and simple installation in small/medium sized boats: serves up to 4 outlets
3 screws, 2 HEP₂O water connections, 2 wires - and the installation is complete!
Based on JABSCO 31600-series self-priming PAR-MAX3 pump
Includes 2 litre accumulator tank and inlet strainer
All mounted on stainless steel base
Packaged Dimensions: L:36.00 x H:43.00 x W:17.00cm
Actual Weight: 4.55 Kg (Approx. 5.05 Kg packed)

Q&As (0)

Spare Parts and Accessories

Accessories

C-Warm Heaters (30)
Water storage heaters.
Copper cylinders up to 141 litres capacity

Full Parts List

Defining features: 12v Parmax3 pump mounted on a stainless steel base with a 2l accumulator tank and an inlet strainer.

Key	Description and Part Code	Quantity Reqd. Per Product
1	Accumulator Tank - 2 litre CW269	1
2	Par Max HD 4' pressure-controlled pump 12 volt d.c., 25psi 15lpm Q401J-112S-3A	1
3	Fresh Water Pump Inlet Strainer - Threaded, for Par-Max pumps Protects all electric diaphragm fresh water pumps 46400-0014	1
4	Click here to enquire about this part.	1
5	Click here to enquire about this part.	1
6	Click here to enquire about this part.	1
7	Click here to enquire about this part.	1
	Click here to enquire about this part. 1 No Key No.	1
	Strainer Service Kit Fine Mesh 18753-0040	1