CW300A Maxi-System 3 Pressure System

£ 0.00 ex. VAT
Maxi-System 3 Pressure System
24 volt d.c.

This product is now obsolete.
The details supplied here are for information only.
Nearest replacement - CW408 MAXI-SYSTEM 4+2 24V

  • Connections: - for 15mm HEP2O pipe work
  • Dimensions: - 320mm long, 282mm wide, 140mm high
  • Fuse Size: - 7(amp)
  • Maximum Current: - 3(amps)
  • Output: - 13.2 litres/minute (2.9 gallons/minute) open flow
  • PRESSURE SWITCH - cuts in at 0.7bar (10psi) - cuts out at 1.7bar (25psi)
  • Pre-assembled and tested for quick and simple installation in small/medium sized boats: serves up to 4 outlets
  • 3 screws, 2 HEP2O water connections, 2 wires - and the installation is complete!
  • Based on JABSCO 31600-series self-priming PAR-MAX3 pump
  • Includes 2 litre accumulator tank and inlet strainer
  • All mounted on stainless steel base
  • Packaged Dimensions: L:36.00 x H:43.00 x W:17.00cm
  • Actual Weight: 4.61 Kg  (Approx. 5.11 Kg packed)


Q&As (0)
Customer Feedback (0)
Spare Parts and Accessories
Aqua Filta
£53.21 ex. VAT
15mm pipe & fittings
15mm pipe & fittings
C-Warm Heaters
C-Warm Heaters (30)
Water storage heaters.
Copper cylinders up to 141 litres capacity

Full Parts List
Defining features: 24v Parmax3 pump mounted on a stainless steel base with a 2l accumulator tank and an inlet strainer.

KeyDescriptionQuantity Reqd.
Per Product
In StockPrice Each
ex. VAT
1Accumulator Tank - 2 litre1
£ 43.90
2Par Max 3' pressure-controlled pump
24 volt d.c.
£ 0.00
3Fresh Water Pump Inlet Strainer - Threaded, for Par-Max pumps
Protects all electric diaphragm fresh water pumps
£ 18.65
4Click here to enquire about this part.1
5Click here to enquire about this part.1
6Click here to enquire about this part.1
7Click here to enquire about this part.1
Click here to enquire about this part.
1 No Key No.
Strainer Service Kit
Fine Mesh
£ 10.68