22610-9427 Ballast pump 12 volt d.c.
22610-9427
Ballast pump 12 volt d.c.
Connections for 25mm (1”) bore hose, ½” NPT internal thread
Adds approx. 125 lbs. (56kgs) of ballast water per minute
This product is now obsolete.The details supplied here are for information only.Currently unavailable in Europe. Expected 2024.
- Connections: - for 25mm (1”) bore hose or ½” NPT
- Dimensions: - 204mm long, 120mm wide, 85mm high
- Fuse Size: 25(amp)
- Maximum Current: - 19(amps)
- Output: - up to 57 litres/minute (15 gallons/minute)
- Includes dry-run impeller
- Self-priming to 4ft (1.2m) and non air-locking
- Bronze body, stainless steel shaft
- D5 Deutsch connector.
- Reversing switch not included
- Packaged Dimensions: L:22.00 x H:9.00 x W:22.00cm
- Actual Weight: 4.00 Kg (Approx. 4.50 Kg packed)
Q&As (0)
