23610-3003 ‘Maxi Puppy’ self-priming pump 12 volt d.c

23610-3003

‘Maxi Puppy’ self-priming pump 12 volt d.c

Ports ½” BSP threaded (use ¾” hose adapters), plus connections for 25mm (1”) bore hose

Connections: - for 25mm (1”) bore hose or 1/2" BSP
Dimensions: - 220mm long, 120mm wide, 85mm high
Fuse Size: - 25(amp)
Output: - up to 45 litres/minute (10 gallons/minute).
High capacity, continuously rated bilge pump
Self priming up to 2.4m vertical lift
Simple, fully serviceable design with few wearing parts
Can generate pressures up to 1 bar (15 psi)
Bronze body, stainless steel shaft
Product Page:
https://www.xylem.com/en-uk/products--services/pumps-packaged-pump-systems/pumps/positive-displacement-pumps2/flexible-impeller-pumps/puppy-series/
Packaged Dimensions: L:28.00 x H:13.00 x W:15.00cm
Actual Weight: 3.85 Kg (Approx. 4.35 Kg packed)

| View All

Q&As (1)

Spare Parts and Accessories

Full Parts List

Defining features: Manufactured 2001 Onwards
Stamped body with 3 screw triangular end cover, 'O' Ring gasket, 12V motor

Key	Description and Part Code	Quantity Reqd. Per Product
1	END COVER 9328-0200	1
2	SCREW - 3PK 91004-0090	3
3	O RING 18753-0660	1
4	IMPELLER-NITRILE 6 blades, 51mm x 22mm. 8mm shaft diameter. 7273-0003B	1
5	SEAL SP2701-52B	1
6	SCREW X3001-147F	2
7	SLINGER - 3 per pack 6342-0000	1
8	Click here to enquire about this part.	1
9	Body 23064-2100	1
	SERVICE KIT Contains - Impeller, Seal, Gasket & End Cover Screws SK224-01	1
	GROMMET (Foot) Kit Bag of 4 929000380A	1