23680-4003 ‘Water Puppy’ self-priming pump 12 volt d.c.

23680-4003

‘Water Puppy’ self-priming pump 12 volt d.c.

Connections for 25mm (1”) bore hose or use ½” hose adapters

Connections: - for 25mm (1”) bore hose or ½” BSP
Dimensions: - 195mm long, 120mm wide, 75mm high
Fuse Size: - 15(amp)
Output: - up to 32 litres/minute (6.5 gallons/minute)
Medium duty, continuously rated bilge and deckwash pump
Self-priming up to 1.2m vertical lift
Simple, fully serviceable design with few wearing parts
Can generate pressures up to 0.4 bar (6psi)
Bronze body, stainless steel shaft
Further product information:
https://www.xylem.com/en-uk/products--services/pumps-packaged-pump-systems/pumps/positive-displacement-pumps2/flexible-impeller-pumps/puppy-series/
Packaged Dimensions: L:22.00 x H:9.00 x W:13.00cm
Actual Weight: 3.22 Kg (Approx. 3.72 Kg packed)

| View All

Q&As (1)

Spare Parts and Accessories

Full Parts List

Defining features: Manufactured 2003 Onwards
Stamped body with 3 screw triangular end cover, 'O' Ring gasket, 12V motor

Key	Description and Part Code	Quantity Reqd. Per Product
1	END COVER 9328-0200	1
2	SCREW - 3PK 91004-0090	3
3	O RING 18753-0660	1
4	IMPELLER & GASKET KIT Impeller: 51mm x 22 mm, 6 blades, single flat drive 6303-0003-P	1
5	SEAL SP2701-52B	1
6	SCREW X3001-147F	2
7	SLINGER - 3 per pack 6342-0000	1
8	MOTOR 12V SP8012-0165B	1
9	Body 23064-2100	1
	SERVICE KIT - NITRILE Contains - Impeller, Seal, Gasket & End Cover Screws SK224	1