23920-2423 Utility Puppy 2000' self-priming pump 12 volt d.c.

23920-2423

Utility Puppy 2000' self-priming pump 12 volt d.c.

¾" BSP threaded ports

Connections: - ¾" BSP inlet and discharge ports.
Dimensions: - length 172mm, width 125mm, height 105mm
Fuse Size: - 15(amp)
Maximum Current: - 13(amps)
Output: - up to 30 litres/minute (7 gallons/minute).
Built-in dry-running protection for up to 10 minutes after initial prime
Rapid self-priming from dry up to 1.2m
Lip type shaft seal
Non-rusting bronze body
Continuously rated electric motor
Simple, fully serviceable design with few wearing parts
Further information, including drawing and datasheet:
https://www.xylem.com/en-uk/products--services/pumps-packaged-pump-systems/pumps/positive-displacement-pumps2/flexible-impeller-pumps/puppy-series/
Packaged Dimensions: L:29.00 x H:14.00 x W:16.00cm
Actual Weight: 3.30 Kg (Approx. 3.80 Kg packed)

Q&As (0)

Spare Parts and Accessories

Full Parts List

Defining features: Lip type seal, 12V motor

Key	Description and Part Code	Quantity Reqd. Per Product
1	SCREW X3001-147F	4
2	END COVER 82mm diameter, 4 screw holes 23825-0000B	1
3	O RING X4020-257A	1
4	IMPELLER & GASKET KIT Impeller: 51mm x 22 mm, 6 blades, single flat drive 6303-0003-P	1
5	CAM 53023-0100	1
6	SCREW X3002-147F	1
6a	O-RING X4020-105A	1
7	Click here to enquire about this part.	1
8	SLINGER - 3 per pack 6342-0000	1
9	Click here to enquire about this part.	1
10	SEAL SP2701-52B	1
11	SCREW X3001-147F	2
	Click here to enquire about this part.	1