RM1100B Rule-Mate 1100 Submersible.

RM1100B

£ 119.87 ex. VAT

Rule-Mate 1100 Submersible.

Submersible pump 12 volt DC.

Connections: For 25mm (1") or 29mm (1 1/8”) bore hose straight outlet
Dimensions: 112mm high, 130mm long, 73mm wide.
Fuse Size: 7.5(amp)
Output: Up to 69 litres/minute (15 gallons/minute). Max. recommended discharge head 2m.
Fully automated bilge pump with integral sensor.
Back up feature to prevent dry running if sensor is fouled, pump reverts to 2.5 minute cycle mode.
Compact pump for smaller vessels.
Tough plastic body.
Back flow prevention to reduce the amount of water left over in the bilge,
Air Vents in the body to help prevent air locks in challenging installations.
Quick release inlet strainer allows rapid cleaning.
Low amp draw conserves batteries.
Ignition protected.
Packaged Dimensions: L:18.00 x H:8.00 x W:20.00cm
Actual Weight: 0.48 Kg (Approx. 0.68 Kg packed)

Q&As (0)

Customer Feedback (0)

Spare Parts and Accessories

33ALA Rule Hi-Water Bilge Alarm Add £76.53 ex. VAT	43 Rule 3-Way Lit Rocker Switch Add £36.41 ex. VAT	45 Rule 3-Way Panel Switch Add £28.01 ex. VAT

1232R 20DA & 27DA Blue Strainer Base Add £17.40 ex. VAT	1203R Port Fitting - 19mm (3/4") 90º Hose Barb Add £10.80 ex. VAT	1204R Port Fitting - 19mm (3/4") Straight Hose Barb Add £10.41 ex. VAT

1205R Port Fitting - 25mm (1") 90º Hose Barb Add £8.14 ex. VAT	1206R Port Fitting - 25mm (1") Straight Hose Barb Add £12.14 ex. VAT	1207R Port Fitting - 29mm (1 1/8") 90º Hose Barb Add £9.43 ex. VAT

1208R Port Fitting - 29mm (1 1/8") Straight Hose Barb Add £9.60 ex. VAT	1221R Check Valve for 19mm (3/4") Rule 800/900/1100 Port Add £6.27 ex. VAT	1222R Check Valve for 25mm (1") Rule 800/900/1100 Port Add £6.01 ex. VAT
1223R Check Valve for 29mm (1 1/8") Rule 800/900/1100 Port Add £6.01 ex. VAT