RM500B-24 Rule-Mate 500 Submersible.

RM500B-24

£ 84.67 ex. VAT

Rule-Mate 500 Submersible.

Submersible pump 24 volt DC.

Connections: For 19mm (3/4") bore hose on outlet
Dimensions: 112mm high, 130mm long, 73mm wide.
Fuse Size: 2(amp)
Output: Up to 31 litres/minute (7 gallons/minute). Max. recommended discharge head 2m.
Fully automated bilge pump with integral sensor.
Back up feature to prevent dry running if sensor is fouled, pump reverts to 2.5 minute cycle mode.
Compact pump for smaller vessels.
Tough plastic body.
Back flow prevention to reduce the amount of water left over in the bilge,
Air Vents in the body to help prevent air locks in challenging installations.
Quick release inlet strainer allows rapid cleaning.
Low amp draw conserves batteries.
Ignition protected and built in thermal cut-off.
Packaged Dimensions: L:18.00 x H:9.00 x W:20.00cm
Actual Weight: 0.46 Kg (Approx. 0.66 Kg packed)

Q&As (0)

Customer Feedback (0)

Spare Parts and Accessories

32ALA Rule Hi-Water Bilge Alarm Add £78.28 ex. VAT	45 Rule 3-Way Panel Switch Add £28.01 ex. VAT	44 Rule 3-Way Lit Rocker Switch Add £38.54 ex. VAT

49 Rule 2-way Panel Switch. Add £25.86 ex. VAT	1232R 20DA & 27DA Blue Strainer Base Add £17.40 ex. VAT	1200R Port Fitting - 19mm (3/4") Straight Hose Barb Add £8.67 ex. VAT

1201R Port Fitting - 19mm (3/4") 90º Hose Barb Add £9.05 ex. VAT	1202R Port Fitting - 25mm (1") Straight Hose Barb Add £10.54 ex. VAT	1220R Check Valve for 19mm (3/4") Rule 500 Port Add £6.27 ex. VAT