53081-2061-230 Utility 80' 1½" self-priming pump 230volt/1 phase/50Hz a.c.

 
53081-2061-230
£ 1,164.57 ex. VAT
 
Utility 80' 1½" self-priming pump 230volt/1 phase/50Hz a.c.
BSP threaded connections for on-board & dockside holding tank pump-out
Heavy Duty Model

  • Connections: 1½” BSP internal threaded inlet and discharge ports. Use CW210 brass hose connectors for 1½” bore hose.
  • Dimensions: 240mm wide, 200mm high, 320mm long
  • Output: up to 75 litres/minute (16 gallons/minute) at 3m total head. Maximum recommended total head 16m
  • Self-priming, solids handling, dry-running - a versatile combination for toilet waste handling
  • Self-primes from dry up to 2.5m vertical lift
  • Body design protects against dry running damage
  • All motors fitted with thermal overload cut-out (manual reset)
  • Continuous rated for heavy use
  • Integral carrying handle
  • Packaged Dimensions: L:39.00 x H:27.00 x W:29.00cm
  • Actual Weight: 17.18 Kg  (Approx. 19.18 Kg packed)

 


Q&As (0)
Customer Feedback (0)
Full Parts List

KeyDescriptionQuantity Reqd.
Per Product
In StockPrice Each
ex. VAT
 
1SCREW - bag of 3 screws
End Cover screws
4
Checking...
£ 5.39
2END COVER
97mm diameter, 4 holes, stainless steel
1
Checking...
£ 24.27
3O RING - 3 pieces per pack1
Checking...
£ 10.78
4IMPELLER - NEOPRENE
8 blades, 65.1mm x 50.8mm. 15.9mm shaft diameter, double flat drive
1
Checking...
£ 72.78
5WEARPLATE1
Checking...
£ 10.67
6Click here to enquire about this part.1
7SCREW1
Checking...
£ 4.00
8FULL CAM - FINGERLESS1
Checking...
£ 60.21
9Click here to enquire about this part.1
10SEAL ASSY1
Checking...
£ 66.69
12Click here to enquire about this part.4
13Click here to enquire about this part.4
14Click here to enquire about this part.1
15MOTOR 0.55KW 4P 230V 50HZ1
Checking...
£ 359.89
SERVICE KIT - Neoprene
Contains - Impeller, Seal, 'O' Ring & End Cover Screws
1
Checking...
£ 102.45