CW331 Utility 80' 1½" self-priming pump 110 volt a.c.

CW331

Utility 80' 1½" self-priming pump 110 volt a.c.

BSP threaded connections for on-board & dockside holding tank pump-out

Connections: 1½” BSP internal threaded inlet and discharge ports. Use CW210 brass hose connectors for 1½” bore hose.
Dimensions: 240mm wide, 200mm high, 320mm long
Output: up to 75 litres/minute (16 gallons/minute) at 3m total head. Maximum recommended total head 16m
Self-priming, solids handling, dry-running - a versatile combination for toilet waste handling
Self-primes from dry up to 3m vertical lift
Body design protects against dry running damage
All motors fitted with thermal overload cut-out (manual reset)
Continuously rated for heavy use
Integral carrying handle
Packaged Dimensions: L:39.00 x H:27.00 x W:29.00cm
Actual Weight: 20.25 Kg (Approx. 22.25 Kg packed)

Q&As (0)

Spare Parts and Accessories

Full Parts List

Key	Description and Part Code	Quantity Reqd. Per Product
1	SCREW - bag of 3 screws End Cover screws X3001-176FB	4
2	END COVER 97mm diameter, 4 holes, stainless steel 53085-0000	1
3	O RING - 3 pieces per pack 18753-0263	1
4	IMPELLER-NITRILE 8 blades, 65.1mm x 50.8mm. 15.9mm shaft diameter, double flat drive 14282-0003B	1
5	WEARPLATE 4156-0000	1
6	Click here to enquire about this part.	1
7	SCREW X3004-174F	1
8	FULL CAM - FINGERLESS 53082-0060	1
9	Click here to enquire about this part.	1
10	SEAL ASSY 22626-0000	1
12	Click here to enquire about this part.	4
13	Click here to enquire about this part.	4
14	Click here to enquire about this part.	1
15	Click here to enquire about this part.	1
	SERVICE KIT - Nitrile Contains - Impeller, Seal, 'O' Ring & End Cover Screws SK411-0003	1