CW351 Utility 80' 1½" self-priming pump 24 volt d.c.

CW351

£ 0.00 ex. VAT

Utility 80' 1½" self-priming pump 24 volt d.c.

BSP threaded connections for on-board & dockside holding tank pump-out

This product is now obsolete.
The details supplied here are for information only.
No direct replacement

Connections: 1½” BSP internal threaded inlet and discharge ports. Use CW210 brass hose connectors for 1½” bore hose.
Dimensions: 240mm wide, 200mm high, 320mm long
Maximum Current: 40(amps)
Output: up to 75 litres/minute (16 gallons/minute) at 3m total head. Maximum recommended total head 16m
Self-priming, solids handling, dry-running - a versatile combination for toilet waste handling
Self-primes from dry up to 3m vertical lift
Body design protects against dry running damage
All motors fitted with thermal overload cut-out (manual reset)
Continuously rated for heavy use
Packaged Dimensions: L:39.00 x H:27.00 x W:29.00cm
Actual Weight: 20.00 Kg (Approx. 22.00 Kg packed)

Q&As (0)

Customer Feedback (0)

Spare Parts and Accessories

£71.28 ex. VAT

£96.37 ex. VAT

Full Parts List

Key	Description	Quantity Reqd. Per Product	In Stock	Price Each ex. VAT
1	SCREW - bag of 3 screws End Cover screws	4	Checking...	£ 5.28	Add
2	END COVER 97mm diameter, 4 holes, stainless steel	1	Checking...	£ 23.77	Add
3	O RING - 3 pieces per pack	1	Checking...	£ 10.56	Add
4	IMPELLER-NITRILE	1	Checking...	£ 71.28	Add
5	WEARPLATE	1	Checking...	£ 10.45	Add
6	Click here to enquire about this part.	1
7	SCREW	1	Checking...	£ 3.92	Add
8	FULL CAM - FINGERLESS	1	Checking...	£ 58.97	Add
9	Click here to enquire about this part.	1
10	SEAL ASSY	1	Checking...	£ 73.94	Add
12	Click here to enquire about this part.	4
13	Click here to enquire about this part.	4
14	Click here to enquire about this part.	1
15	Motor 24v	1	Checking...	£ 0.00	Add
	SHAFT EXTENSION	1	Checking...	£ 151.83	Add
	Motor Brush (Single) 2 Required per motor	1	Checking...	£ 26.13	Add
	FAN	1	Checking...	£ 11.23	Add
	FAN COVER	1	Checking...	£ 56.16	Add