JabscoShop closed to sales in December 2024 and now this site only provides product information. More...

53041-2003-400 Utility 40' 1" Self-Priming Flexible Impeller Pump

 

53041-2003-400
 
Utility 40' 1" Self-Priming Flexible Impeller Pump
400volt/3 phase/50-60Hz IP54 Electric Motor, Nitrile oil-resistant impeller.
  • Connections: 1" BSP internal threaded ports
  • Dimensions: 300mm long, 210mm wide, 240mm high
  • Output: up to 35 litres/minute at 3m head. Max. differential pressure 1.6bar
  • Built-in dry-running protection for up to 30 minutes after initial prime
  • Rapid self-priming from dry up to 2m
  • Will handle hard or soft solids
  • Corrosion resistant bronze body, stainless steel shaft
  • Carbon-ceramic mechanical shaft seal
  • Simple, fully serviceable design with few wearing parts
  • Note: Handle not included with this model
  • Actual Weight: 13.70 Kg  (Approx. 14.70 Kg packed)

 


Q&As (0)
Full Parts List

KeyDescription and Part CodeQuantity Reqd.
Per Product
 
1SCREW
X3001-147F
4
2END COVER
82mm diameter, 4 screw holes
23825-0000B
1
3O RING - 3 pieces per pack
18753-0261
1
4IMPELLER-NITRILE
12 blades. 57mm x 51mm. Double flat drive.
14281-0003B
1
5WEARPLATE
2235-0000
1
6Click here to enquire about this part.
1
7SCREW - 3PK
91003-0010
1
8CAM
53042-0030
1
9Click here to enquire about this part.
1
10SEAL ASSY
22626-0000
1
11SEAL SPACER
23828-1000
1
12SCREW
X3001-178F
4
13Click here to enquire about this part.
4
14Click here to enquire about this part.
1
15Click here to enquire about this part.
1
SERVICE KIT
Contains - Impeller, Seal, 'O' Ring & End Cover Screws
SK409-0003
1