JabscoShop is closing. Last orders accepted 16th December 2024. Details...

53081-2003-230 Utility 80' 1½" Self-Priming Flexible Impeller Pump 230volt/1 phase/50Hz a.c.

 

53081-2003-230
£ 726.52 ex. VAT
 
Utility 80' 1½" Self-Priming Flexible Impeller Pump 230volt/1 phase/50Hz a.c.
230volt/1 phase/50Hz IP55 Electric Motor, Nitrile oil-resistant impeller. Heavy Duty

  • Connections: 1½” BSP internal threaded ports
  • Dimensions: 330mm long, 250mm wide, 240mm high
  • Output: up to 80 litres/minute
  • Built-in dry-running protection for up to 30 minutes after initial prime
  • Rapid self-priming from dry up to 3m
  • Will handle hard or soft solids
  • Corrosion resistant bronze body, stainless steel shaft
  • Carbon-ceramic mechanical shaft seal
  • Simple, fully serviceable design with few wearing parts
  • Continuously Rated Motor
  • Actual Weight: 17.35 Kg  (Approx. 19.35 Kg packed)

 


Q&As (0)
Customer Feedback (0)
Spare Parts and Accessories
Full Parts List

KeyDescriptionQuantity Reqd.
Per Product
In StockPrice Each
ex. VAT
 
1SCREW - bag of 3 screws
End Cover screws
4
Checking...
£ 5.39
2END COVER
97mm diameter, 4 holes, stainless steel
1
Checking...
£ 24.27
3O RING - 3 pieces per pack1
Checking...
£ 10.78
4IMPELLER-NITRILE
8 blades, 65.1mm x 50.8mm. 15.9mm shaft diameter, double flat drive
1
Checking...
£ 72.78
5WEARPLATE1
Checking...
£ 10.67
6Click here to enquire about this part.1
7SCREW1
Checking...
£ 4.00
8CAM1
Checking...
£ 14.84
9Click here to enquire about this part.1
10SEAL ASSY1
Checking...
£ 66.69
12Click here to enquire about this part.4
13Click here to enquire about this part.4
14Click here to enquire about this part.1
15MOTOR 0.55KW 4P 230V 50HZ1
Checking...
£ 359.89
SERVICE KIT - Nitrile
Contains - Impeller, Seal, 'O' Ring & End Cover Screws
1
Checking...
£ 98.39