53081-2003-400 Utility 80' 1 1/2" Self-Priming Flexible Impeller Pump 400volt/3 phase/50Hz a.c.

 

53081-2003-400
£ 597.12 ex. VAT
 
Utility 80' 1 1/2" Self-Priming Flexible Impeller Pump 400volt/3 phase/50Hz a.c.
400volt/3 phase/50Hz IP55 Electric Motor, Nitrile oil-resistant impeller.

  • Connections: 1 1/2" BSP internal threaded ports
  • Dimensions: 330mm long, 250mm wide, 240mm high
  • Output: up to 80 litres/minute at 3m head. Max. differential pressure 1.6bar
  • Built-in dry-running protection for up to 30 minutes after initial prime
  • Rapid self-priming from dry up to 3m
  • Will handle hard or soft solids. Liquids up to 150cP.
  • Corrosion resistant bronze body, stainless steel shaft
  • Carbon-ceramic mechanical shaft seal
  • Simple, fully serviceable design with few wearing parts
  • Packaged Dimensions: L:37.00 x H:31.00 x W:32.00cm
  • Actual Weight: 15.68 Kg  (Approx. 17.68 Kg packed)

 


Q&As (0)
Customer Feedback (0)
Spare Parts and Accessories
Vacuum switch
£60.02 ex. VAT
£24.00 ex. VAT
Full Parts List

KeyDescriptionQuantity Reqd.
Per Product
In StockPrice Each
ex. VAT
 
1SCREW - bag of 3 screws
End Cover screws
4
Checking...
£ 5.39
2END COVER
97mm diameter, 4 holes, stainless steel
1
Checking...
£ 24.27
3O RING - 3 pieces per pack1
Checking...
£ 10.78
4IMPELLER-NITRILE1
Checking...
£ 72.78
5WEARPLATE1
Checking...
£ 10.67
6Click here to enquire about this part.1
7SCREW1
Checking...
£ 4.00
8CAM1
Checking...
£ 14.84
9Click here to enquire about this part.1
10SEAL ASSY1
Checking...
£ 66.69
12Click here to enquire about this part.4
13Click here to enquire about this part.4
14Click here to enquire about this part.1
SERVICE KIT - Nitrile
Contains - Impeller, Seal, 'O' Ring & End Cover Screws
1
Checking...
£ 98.39