JabscoShop is closing. Last orders accepted 16th December 2024. Details...

18590-2092 Black water tank Macerator pump

 

18590-2092
£ 261.36 ex. VAT
 
Black water tank Macerator pump
12 volt d.c.
6 ratings   Add your rating

  • Connections: - for 38mm (1½”) bore inlet hose, 25mm (1”) bore discharge hose
  • Dimensions: - 290mm long, 120mm wide, 95mm high
  • Fuse Size: - 20(amp)
  • Output: - up to 43 litres/minute (9 gallons/minute) at 3m total head. Maximum recommended total head 6m
  • Compact toilet waste macerator pump. Sits on or near black water holding tank.
  • 15 minute rated, for use with waste holding tanks up to 900 litres (200 gallons) capacity
  • Grinds raw toilet waste to a uniform slurry for easy transfer and discharge
  • Self-priming up to 0.6m vertical lift
  • Fully sealed motor with Dry-Run protection device
  • Heavy duty 4 blade chopper
  • Packaged Dimensions: L:30.00 x H:9.00 x W:13.00cm
  • Actual Weight: 2.19 Kg  (Approx. 2.69 Kg packed)

 
Black water tank Macerator pump
Black water tank Macerator pumpBlack water tank Macerator pump


Q&As (1)
Customer Feedback (0)
Spare Parts and Accessories
Full Parts List
Defining features: None! 12V motor.

KeyDescriptionQuantity Reqd.
Per Product
In StockPrice Each
ex. VAT
 
1Stainless Steel Bolt Kit
Replaces studs, nuts and washers in older models.
1
Checking...
£ 17.36
GROMMET (Foot) Kit
Bag of 4
1
Checking...
£ 9.43
2MACERATOR HOUSING1
Checking...
£ 41.87
3CHOPPER AND LOCK NUT KIT
For macerator pump 18590-2xxx series
1
Checking...
£ 7.74
4WEARPLATE1
Checking...
£ 11.34
5GASKET KIT
Contains 2 gaskets
1
Checking...
£ 8.94
6IMPELLER-NITRILE
51mm x 22 mm, 6 blades, single flat drive
1
Checking...
£ 29.33
7WEARPLATE1
Checking...
£ 13.33
8BODY1
Checking...
£ 38.14
9SEAL
Replaced by 1040-0000
1
Checking...
£ 17.19
10SLINGER - 3 per pack1
Checking...
£ 13.33
11MOTOR ASSY 12V1
Checking...
£ 0.00
SERVICE KIT - 18590 macerator pump
Contains Body, Impeller, Wearplate , Gaskets and Seal
1
Checking...
£ 51.60