JabscoShop closed to sales in December 2024 and now this site only provides product information. More...

18590-2094 Black Water Tank Macerator pump

 

18590-2094
 
Black Water Tank Macerator pump
24 volt d.c.
  • Connections: - for 38mm (1½”) bore inlet hose, 25mm (1”) bore discharge hose
  • Dimensions: - 290mm long, 120mm wide, 95mm high
  • Fuse Size: - 15(amp)
  • Output: - up to 43 litres/minute (9 gallons/minute) at 3m total head. Maximum recommended total head 6m
  • Compact toilet waste macerator pump. Sits on or near black water holding tank.
  • 15 minute rated, for use with waste holding tanks up to 900 litres (200 gallons) capacity
  • Grinds raw toilet waste to a uniform slurry for easy transfer and discharge
  • Self-priming up to 0.6m vertical lift
  • Fully sealed motor with Dry-Run protection device
  • Heavy duty 4 blade chopper
  • Packaged Dimensions: L:30.00 x H:9.00 x W:13.00cm
  • Actual Weight: 2.20 Kg  (Approx. 2.70 Kg packed)

 
Black Water Tank Macerator pump
Black Water Tank Macerator pumpBlack Water Tank Macerator pump


Q&As (1)
Full Parts List
Defining features: None! 24V motor.

KeyDescription and Part CodeQuantity Reqd.
Per Product
 
1Stainless Steel Bolt Kit
Replaces studs, nuts and washers in older models.
17288-1000
1
GROMMET (Foot) Kit
Bag of 4
92900-0120
1
2MACERATOR HOUSING
18594-1000
1
3CHOPPER AND LOCK NUT KIT
For macerator pump 18590-2xxx series
37056-2000
1
4WEARPLATE
18597-1000
1
5GASKET KIT
Contains 2 gaskets
18596-1000
1
6IMPELLER-NITRILE
51mm x 22 mm, 6 blades, single flat drive
6303-0003B
1
7WEARPLATE
12316-1002
1
8BODY
18593-1000
1
9SEAL
Replaced by 1040-0000
92700-0910
1
10SLINGER - 3 per pack
6342-0000
1
11MOTOR ASSY 24V
17246-1024
1
SERVICE KIT - 18590 macerator pump
Contains Body, Impeller, Wearplate , Gaskets and Seal
18598-1000
1